rockchip: Clarify docs on SPI writing

We use every second block when creating a SPI image, so update the text to
say this explicitly.

Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Reviewed-by: Philipp Tomsich <[email protected]>

diff --git a/doc/README.rockchip b/doc/README.rockchip
index 9542265a83000a1fb7c033752035d799df27b2c8..db5724e073043bd8fbca47634d555dd7613e7265 100644 (file)
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -262,7 +262,7 @@ To write an image that boots from SPI flash (e.g. for the Haier Chromebook):
    dd if=out.bin of=out.bin.pad bs=4M conv=sync
 
 This converts the SPL image to the required SPI format by adding the Rockchip
-header and skipping every 2KB block. Then the U-Boot image is written at
+header and skipping every second 2KB block. Then the U-Boot image is written at
 offset 128KB and the whole image is padded to 4MB which is the SPI flash size.
 The position of U-Boot is controlled with this setting in U-Boot: